Hubs & Parts

New old stock. Made in Canada. 115mm over locknut dimension. 48mm spoke hole circle. 93mm flange centre to flange centre. 36 hole. Includes 3/8in axle bolt and nut. Drilled for 12g spokes. Grease nipple for re-lubrication. CCM Sulky Horse Cart Hub and Axle 640004 - NOS

Good working condition. Tested - 3 gears and brake all function properly. 112mm over locknut dimension. 36 hole. 18 tooth cog. Includes shift rod, bell crank, 1 axle nut and washer. Chrome finish has deteriorated on the hub shell. Bell crank has some surface rust. Oil port is intact and functional. Shimano...

Good working condition. Tested - 3 gears and brake all function properly. 112mm over locknut dimension. 36 hole. 18 tooth cog with minimal wear. Includes shift rod, bell crank, axle nuts and washers. Chrome finish is very good throughout. Oil port is intact and functional. Shimano 3SC 3 Speed Coaster...

Good condition. Zipp part# 11.1915.034.000 For use with Zipp 88 front hub. Bearings are snug and smooth. Threaded parts and set screws are in good condition. Includes bearings, spacers, and hub end caps. Zipp 88 Complete Front Axle with Bearings Spacers Caps

Good condition. For use with Origin8 mountain bike rear cassette hub - early version. 135mm OLD. 10mm QR. Axle is straight. Threaded parts are in good condition. Includes hub end caps, seals, and cassette body fixing nut. Also includes 1 bearing in smooth, useable condition. Origin8 Rear Axle for Mountain...

New old stock. Sold as a left and right pair. Made in France. 5/16 inch. Chrome plated bronze construction. Integrated toothed washer. Chrome finish is in excellent condition. Toothed washers have some tarnish from age. Huret Luxe Bronze Wing Nuts 5/16in Pair - NOS

Good condition. Sold as a left and right pair. Made in Japan. 3/8 inch. 26TPI. Aluminum construction. Integrated toothed washer. Finish has moderate scrapes and scratches from use. Toothed washers have some tarnish from age. Sugino Aluminum Wing Nuts 3/8in 26TPI

Good condition. 40 hole. 110mm OLD. Includes no-turn washers, mounting nuts, and gear chain. Tested - shifts through all 3 gears. Oil port is intact. 18 tooth cog shows significant wear. Chrome finish in in excellent condition with some minor blemishes. Manufactured in 1953. Made in Birmingham, Engl...

Excellent condition. Chrome is very good. 134mm between nuts with lever closed. Includes centring springs. Sunshine Rear Quick Release Skewer 134mm

Fair condition. Aluminum alloy hub shell - some minor blemishes on the finish from previous spokes. No bearings. Cones have some pitting and should be replaced. Axle is straight and threads are good. 36 hole. 5/16in axle. Approximately 93mm OLD. 72.6mm overall flange diameter. Altenburger High Flange...

Excellent condition. Sold as a left and right pair. Made in England. 5/16 inch x 26TPI. Chrome plated steel construction. Integrated toothed washer. Chrome finish is in excellent condition. Phillips Club Wing Nuts 5/16in 26TPI Pair

Fair condition. Shimano 333 internally geared hub. F-type. 110mm OLD. 153mm axle length. 3/8in axle diameter. 36 hole. Includes cog & retaining ring, shift rod, bell crank, axle nuts and washers. Good working order. Hub shell has some pitting in the chrome. 18 tooth cog shows minor wear. Includes a functional...

Good condition. For Sachs 3x7 internallly geared hubs. One end attaches to the cable and the other clips to the hub chain for quick adust and release. Sachs 3x7 Hub Chain Cable Connector