Wheels

Good condition. Wheel is straight with no flat spots. Bearings are good. Includes speedo driver cup in good condition. Finish is tarnished and faded in spots. Includes rotor bolts. 19x1.85in. Kawasaki part# 41073-1139-21 . Fits Kawasaki: KZ1000J 1981-83 KZ1100A SHAFT 1981-83 KZ1100B GPZ 1981-82 KZ1100L1...

Good condition. Wheel is straight with no dents or flat spots. Drive splines are good. Aluminum is tarnished. Includes rotor bolts. 17 inch.

Good condition. Wheel is straight with no flat spots. Tire bead is clean, no damage. Finish is heavily stained and tarnished throughout. Bearings are sticky from lack of use. Includes rotor bolts. 19x1.85in. Yamaha part# 4H7-25168-29-8L . Fits Yamaha: XJ650L MIDNIGHTMAXIM 1981 XJ750M MIDNIGHTMAXIM 1983...

Good condition. Wheel is straight with no flat spots. Paint is fair with some scuffs and scratches. Bearings are good. Hub seal is good. Includes rotor bolts. 2.5x16in. Honda part number: 44650-MB2-770, 44650-MB2-670. Fits Honda: VF700F INTERCEPTOR 1984 VF750F INTERCEPTOR 1983-84 1983-84 Honda VF700F...

Good condition. Wheel is straight with no flat spots. Finish is good with minor scrapes and scratches and some spots of tarnish on the aluminum. Bearings are snug and smooth. Hub seals are good. Speedo driver tabs are good. Includes brake rotor bolts. 19 x 2.15in. Fits 1983-84 VT750C Shadow. May fit...

Good condition. Wheel is straight with no dents or flat spots. Finish has moderate tarnish and cosmetic blemishes. No bead gouges. Bearings are snug and smooth. Brake lining is good with light surface rust. Drive spline seal is intact. Gold finish. 15x3.00 inch. Yamaha part number: 42H-25338-01-8L. Fits...

Good condition. Wheel is straight. No flat spots. Bearings are good. Some tarnish on the finish. No bead gouges. Includes rotor bolts. Includes cush drive rubbers and retaining plate. 16x3.50. Honda part# 42650-MW5-305. Fits Honda: GL1500A GOLDWING ASPENCADE 1991-00 GL1500I GOLDWING INTERSTATE 1991-96...

Good condition. Rim is straight. No dents or flat spots. Chrome is fair with several pitted spots. Inside edge has surface rust - no rot. Includes rotor mounting bolts. Spokes are good with no rust. Honda hub part# 44601-317-702. Fits Honda: CB350F FOUR 1972-74 CB350G SUPER SPORT 1973 CB360G 1974 CB360T...

Good condition. Rim is in good condition with some very small spots of pitting in the chrome. Rim model: Takasago 185Bx18 4E 308. Some rust inside the bead edge of the rim - no rot. Most of the spokes have surface rust. Includes rotor mounting bolts. Kawasaki part# 41074-036. Fits Kawasaki: S3 MACH II...

Good condition. Rim is straight - no flat spots. Chrome is very good. Some surface rust on spokes. Hub will polish up nicely. Includes rotor mounting bolts. Lots of surface rust on outer rim surface - no rot. A few nicks in chrome on the bead edge - see pictures. Kawasaki part# 41074-045. Fits Kawasaki:...

Good condition. Wheel is straight with no dents or flat spots. Finish is good with minimal scratches. There is some light surface rust on the non-disc side of the hub. All plastic spoke covers are intact. Includes rotor bolts. Single rotor version. 19in. Honda part# 44650-415-315. Fits Honda: CX500 1978...

Good condition. Rim is straight with no flat spots. There are some minor scrapes and scratches on the sidewalls. Includes rotor bolts. 19in. Honda part# 44650-426-771. Fits Honda: CB650 1979 CB750L 1979 1979 Honda CB650 CB750L Front Comstar Wheel Rim 44650-426-771

Good condition. Wheel is straight with no damage or flat spots. Bearings are good. Hub end seals are good. One brake rotor stud is broken and needs to be replaced. Black finish is good with monor scrapes and scratches. 18x2.50 in.

Good condition. Bearings are good. Includes brake vent. D.I.D. 18in. A few scuffs in the bead edge. Honda part numbers: 42650-MA6-621, 43141-MA6-000. Fits Honda: CBX550F 1982-83 CBX550F2 1982 1982-83 Honda CBX550F CBX550F2 Rear Wheel Rim with Brake Vent 42650-MA6-621 43141-MA6-000

Good condition. Bearings are good. Includes left and right brake vents. D.I.D. 18in A few scuffs in the bead edge. A bit of paint over-spray in one spot.

Good condition. Wheel is straight with no dents or flat spots. Finish is dulled and tarnished. Bearings are sticky from lack of use. Threaded holes are good. Seals are good. 1.85 x 19 inch. Yamaha part# 2H9-25168-29. Fits: XS750 1977-79 XS750S 1979 XS850 1980-81 XS850S 1980-81 XS1100 1978-81 XS1100S...

Good condition. Rim is straight with no flat spots. Drive spline is good. Bearings are good. Hub seal is good. Anodized finish is poor and will need paint. 17x2.50 in. Yamaha part number: 2H8-W2533-00-00. Fits Yamaha: XS850 1980-81 XS1100 1978-81 1978-81 Yamaha XS850 XS1100 Rear Wheel Rim 2H8-W2533-...

Good condition. Wheel is straight. No flat spots. Includes rotor mounting bolts. Finish is decent with some minor tarnish, scrapes, and scratches. Bearings are good. Hub seal is good. 19x2.15in. Dual disc. Honda part# 44650-ME5-305. Fits Honda: CB650SC NIGHTHAWK 1983-85 CBX600E 1983 CBX650E 1983 1983-85...

Good condition. Wheel is straight with no dents or flat spots. Finish is faded and tarnished. Bearings are slightly rough - may need replacement. 19in. Yamaha part numbers: 56W-25168-00-8L, 42H-25168-00-8L. Fits Yamaha: XV700C VIRAGO 1986-87 XV750 VIRAGO 1988-90 XV1000 VIRAGO 1984 (E) USA XV1100 VIRAGO...

Fair condition. Rim is straight with no flat spots. Chrome has moderate pitting throughout. Inside rim bead is rust coated but not rotten. Some spokes have surface rust. Includes sprocket with moderate wear, and mounting hardware. Bearings are smooth. Hub finish is tarnished throughout. Honda hub part#...

Fair condition. Rim is straight with no flat spots or damage. There is rust on many of the spokes and in the groove of the rim. Suface rust only - no rot. DID 2.5 x 17in. Bearings are good.

Good condition. Rim is straight with no flat spots. Plenty of brake lining remaining. Some spokes have surface rust. Some pitting and surface rust on the rim. Suzuki part number: 55311-38300, 54110-38300. Fits Suzuki: GN250 1982-83 1982-83 Suzuki GN250 Front Spoked Wheel 55311-38300 54110-38300

Good condition. Wheel is straight. No flat spots. Includes valve. Finish is tarnished and needs a good clean-up and polish. Drive splines are good. Drum surface is good - needs sanding and cleaning. Honda part numbers: 42615-MB0-700, 42650-MB0-700. Fits Honda: VF700S SABRE 1983-85 1983-85 Honda VF750S...

Good condition. Wheel is straight. No flat spots. Bearings are good. Hub seals are good. Has been poorly painted. No bead gouges. Speedo driver ring is good. Includes brake rotor bolts. 18x2.50. Honda part number: 44650-MK3-305. Fits Honda: VF700C MAGNA 1985-86 VF750C MAGNA 1985-86 1985-86 Honda VF700C...

Good condition. Rim is straight with no dents or flat spots. Paint is scuffed and scratched in several places. Rotor bolts are included. Bearings are good. 16in x 2.50in. Yamaha part# 46X-25168-00. Fits Yamaha: FZ600 FAZER 1986-88 1986-88 Yamaha FZ600 Fazer Front Wheel Rim 46X-25168-00

Good condition. Rim is straight with no flat spots. Drive spline is good. Bearings are sticky from lack of use. Hub seal is good. Anodized finish is decent under the grime - some tarnish. 16x3.00 in. Yamaha part# 3H3-W2533-01. Fits Yamaha: XS850S Special 1980-81 XS1100S Special 1979-81 1979-81 Yamaha...

Good condition. Wheel is straight. No flat spots or damage. Spoke rivets are solid. No major gouges in bead edges - some small scrapes. Some surface rust on the spokes. Bearings are stiff from lack of use. 19x1.85in. Honda part# 44650-431-670. Fits Honda: GL1000 Goldwing 1978 1978 Honda GL1000 Goldwing...

Good condition. Rim is straight - no dents or flat spots. Chrome is decent with some light pitting. Spokes have a coat of surface rust. Dual disc compatible. Inside surface has rust - no rot. Bearings are stuck from sitting idle. 18x1.85in. Suzuki rim part# 55311-44060. Fits Suzuki: GN400T 1980-81 GN400TX...

Good condition. Wheel is straight. No dents or flat spots. No cush drive or drive spline. 18in. Bearings are good. Finish is good with minor scrapes, scratches, and tarnish. Right side bearing seal is deformed. Includes rotor mounting bolts.

Good condition. Wheel is straight with no flat spots. Finish is tarnished throughout. Bearings are slightly rough. Drive spline and seal are good. Plenty of brake lining remaining. 16 x 3.00in. Honda part# 42650-ME5-305. Fits Honda: CB650SC NIGHTHAWK 1983-85 CBX600E 1983 CBX650E 1983 1983-85 Honda CB650SC...