Headsets

Good condition. A '90s classic with Cartridge bearings. Finish has some minor blemishes. Labels are still clear. Headset bearing run quite smooth with some detectable dirt in the lower bearing. Lock nut has some minor wrench marks. Bottom race has corrosion on the underside. Fits standard 1in threaded...

Good condition. For 7/16in steer tube. Non-threaded. 38mm cone OD. 3/16 balls in bottom cage. 5/32in balls in upper cage. Fits some children's vintage CCM bikes - possibly Swinger. Likely 1970s vintage. Bottom cone has some small indentations in the bearing suface. Top cone shows very little wear. CCM...

Built for abuse. The FSA Pig Headset features a forged chromoly lower 12mm deep cup. Super oversized 1/4 15 lower ball bearings. Upper 5/32 x 22 caged ball bearings. Chromoly crown race. Fits 34mm ID head tube. Fits 28.6mm 1 1/8in steer tube with 30mm bearing race seat. Stack Height: 16.4 + 13.6 = 30mm...

Possibly new old stock - no evidence of use. For 1in 25.4mm steer tube. 24 TPI. 28.7mm wrench flats. 25.7mm depth. Unknown brand and vintage. Antique Acorn Headset Lock Nut

New old stock. Fits 1in or 25.4mm steer tube. 24 threads per inch. 30.2mm wrench flats. 12.4mm depth. Engraved "C.C.M." CCM Vintage Headset Lock Nut - NOS

Fair condition. 6061-T6 Aluminum cups have a number of scuffs, scratches, and scrapes. The base of the bottom cup is scraped and marred from removal from fork. Labels are still clear bur scuffed in some spots. Top bearing is very smooth - bottom bearing is a little stiff and may need serviceing. No preload...

Mix of new and used parts. All for 1in steer tubes. 7 Complete sets. 20 Lock Nuts. 11 Upper races. 6 Crown races. 16 Bearing cages. 18 Cups. 17 Spacers, lock rings, washers. Many brands including Raleigh, CCM, Tange, YST, and more... Job Lot of Antique and Vintage Headsets and Parts - New and Used

New old stock. Replaces the traditional star nut with a removeable compression nut. Nut has top o-ring seal to prevent water entry. Alloy top cap. Fits 1 1/8in steer tubes 25.4mm inside diameter. Available in silver or blue. FSA Conix Compression Nut and Cap for 1 1/8in Headset - NOS

New old stock. Open cage ball bearings. Steel components. Fits 30mm ID head tube. Fits 25.4mm 1in steer tube. 24TPI thread. 27mm crown race ID. 37.5mm stack height. Chrome finish. Complete set. In original box. Hatta model# MA-S. Hatta MA-S 1in 30.0/27.0 Headset - NOS

New old stock. Not in original package. Note: No star nut or cap. Sealed cartridge bearings. Steel cups. Fits 34mm ID head tube. Fits 28.6mm 1 1/8in steer tube. 30mm crown race. Stack Height: 30mm Top Stack Height: 17mm Bottom Stack Height: 13mm Ritchey Comp Logic 1 1/8in Threadless Headset - NOS

New old stock. Open cage ball bearings. Steel cups. Fits 37mm ID head tube. Fits 31.8mm 1 1/4in steer tube. 33mm crown race ID. Stack Height: 46mm Top Stack Height: 34mm Bottom Stack Height: 13mm Complete set. Not in original package. YST Evolution 1 1/4in Headset - NOS

New old stock. Will fit a variety of vintage and modern tricycles. 19.5mm bushing inside diameter. 35mm bushing outside diameter (tricycle head tube ID). 38.2mm bushing flange diameter. 14.3mm bushing depth. 22.5mm clamp ID. 26.3mm clamp OD. 18mm clamp depth. Vintage Tricycle Headset Bushings and Clamp...

New old stock. Original Cannondale part. Inside diameter: 39.7mm Outside diameter: 50.8mm Depth: 7.14mm Imperial Diameter: 1-1/2" Cannondale part# HD169. Sold as a pair. Fits Cannondale Headshok models as well as some Lefty models. Cannondale Headshok Headset Bearings HD169 - Pair

Take-off from a new bike - hidden insert section of cup is scuffed. The FSA Orbit X-CX Headset features a new and improved integrated cable hanger now with a barrel adjuster feature, forged CNC machined 6061/T6 alloy cups and angular contact bearings. The FSA Orbit X-CX Headset also features a patented...

Excellent condition. Polished titanium finish is excellent with some very minor scuffs. Labels are in nice condition. Bearings are very good with some detectable grit in the bottom one. Underside of bottom race is marked from removal - does not affect function. Includes preload cap. Fits standard 1 1/8in...

New old stock. Adapts headset cups to a larger frame head tube. Aluminum construction. Silver. Upper and lower set. Available: 1in to 1 1/8in. 1in to 1 1/4in. 1 1/8in to 1 1/4in. Select size from drop-down menu. Tamer Headset Sizers Head Tube Shims - 3 Sizes - NOS