Trees, Steerers, Clamps

Good condition. Steerer is straight. Includes upper and lower races, no bearings. No damage, some rust and cosmetic scratches. Includes all pinch bolts. Yamaha part number: 5G5-23340-00-33, 3Y6-23442-00-98, 4X7-W2341-00-33. Fits Yamaha: XV750 VIRAGO 1981-83 1981-83 Yamaha XV750 Virago Fork Tree 5G5-23340-00-33...

Good condition. Some tarnish on the upper clamp. Some surface rust on the lower clamp. Steerer is straight. Includes head bearings and hardware. Includes fork pinch bolts. Includes gauge dampers. Yamaha part numbers: 2AE-23340-30, 42X-W2341-01-38. Fits Yamaha: XV700 VIRAGO 1984 XV700C VIRAGO 1986-87...

Good condition. Some tarnish on the upper clamp. Some surface rust on the lower clamp. Steerer is straight. Includes head bearings and hardware. Includes fork pinch bolts. Includes gauge dampers. Yamaha part numbers: 2AE-23340-30, 42X-W2341-01-38. Fits Yamaha: XV700 VIRAGO 1984 XV700C VIRAGO 1986-87...

Good condition. Needs a good clean-up and polish. Includes head bearings and hardware. Includes bar clamps. Includes lower pinch bolts. Yamaha part numbers: 2AE-23340-30, 42X-W2341-01-38, 42X-23442-00-38. Fits Yamaha: XV700 VIRAGO 1984 XV700C VIRAGO 1986-87 XV700S VIRAGO 1986 XV750 VIRAGO 1984 XV1000...

Good condition. No damage. Steerer is straight. Includes bearings and head hardware. Includes bar clamps. Instrument cluster bushings are good. Paint is decent. Yamaha part numbers: 4H7-23435-00-98, 5N8-23340-00-33. Fits Yamaha: XJ650 MAXIM 1980-83 XJ650L MIDNIGHTMAXIM 1981 XJ750 MAXIM 1983 XJ750M MIDNIGHTMAXIM...

Good condition. Steerer is straight - no damage. Upper clamp is tarnished throughout. Lower clamp needs fresh paint. Includes 4 pinch bolts. Includes head bearing hardware in good condition. No handlebar clamp. Fits 1983-85 VT750C Shadow. 1983-85 Honda VT750C Shadow Fork Triple Tree

Good condition. No damage. Steerer is straight. Finish is tarnished. Paint on lower clamp is deteriorated. Includes bar clamp and fuse box cover - no fuse box. Includes head hardware. Includes fork leg pinch bolts. Includes lower horn and accesory bracket. 1983-84 Honda VT500C Shadow Fork Triple Tre...

Good condition. No cracks or damage. Mounting tabs are intact. Has been painted - finish is poor. 1983-84 Honda VT500FT Ascot Fork Cover Front Emblem

Good condition. Includes bar clamps and bolts. Includes mounting hardware. Includes fork leg pinch bolts. Lower clamp needs paint. Some surface rust on bar clamps. Steer tube is straight. Suzuki part numbers: 51310-18510, 51410-18010. Fits Suzuki: T250R HUSTLER 1971 1971 Suzuki T250R Hustler Fork Tree...

Good condition. Removed from a crashed America with approximately 7000km. Steerer is straight. Finish is decent with some moderate scrapes and scratches. Includes head hardware in good clean condition. Includes bar clamps. Includes upper and lower pinch bolts. Includes wire cable guide. Triumph part...

Good condition. Steerer is straight. No cracks or damage. Paint is chipped and flaking throughout. Chrome cap nut is pitted. Includes bar clamps and bolts. Includes all pinch bolts. Includes some head hardware. Includes under-side accessory bolts. Fits Harley Davidson: SX125 1975-78 SXT125 1975-78 1975-78...

Excellent condition. Steer tube is straight. Paint is good with some minor scuffs and scratches. Includes bar clamps in excellent condition. Includes head bearing races in good condition. Includes mounting and accessory bolts. Yamaha part numbers: 3Y8-23340-G0-R4, 3Y6-W2341-00-98. Fits Yamaha: SR250...

Fair condition. Includes upper and lower bearings and all pinch bolts. Lower clamp has one broken steering stop. Upper clamp has some hammer marks. Some moderate chips and scratches. Hyosung part number: 51311HP9502CR, 51311HP9503CR. Fits Hyosung: GV650 Aquila 30th Anniversary Edition 2008 2008 Hyosung...

Good condition. Includes roller bearings. Includes head hardware. Steer tube is straight. Paint is scuffed, scratched, and faded. No clamp bolts. Suzuki part# 51410-49460-291. Fits Suzuki: GS1100GK 1982 1982 Suzuki GS1100GK Lower Fork Clamp and Steer Tube 51410-49460-291

Good condition. No damage. Some scuffs and scratches in the paint. Includes head hardware. Includes bar bolts. Kawasaki part numbers: 44037-1319, 44039-1246-10. Fits Kawasaki: EX500D GPZ500S 1994-00 EX500D NINJA 500 1994-00 EX500D NINJA 500R 2001-07 EX500E GPZ500S 1994-00 EX500E GPZ500S 2003 EX500F GPZ500S...

Good condition. No damage. Paint is decent with some chips, scuffs and scratches. Includes bar clamp bolts - no bar clamps. Includes head bearings and hardware. Includes pich bolts. Honda part numbers: 53230-MJ1-670, 53200-MJ1-670. Fits Honda: CB700SC NIGHTHAWK S 1984-86 CB750SC NIGHTHAWK S 1984-85 1984-86...

Good condition. Steerer is straight. Includes head bearing races and hardware in good condition. Crown has surface rust - needs paint. Includes fork leg pinch bolts. Honda part# 53200-426-010ZA. Fits Honda: CB650 1979-82 CB650C 1980-81 1979-82 Honda CB650 CB650C Fork Lower Crown and Steering Stem 53...

Good condition. Includes bar mounts. Includes bearing races and mounting hardware. Includes fork leg pinch bolts. Includes fork ears - ears are dented and have surface rust.

Good condition. Minimal corrosion on the paint. Includes bar clamps and bolts. Includes wire clips. Honda part numbers: 53132-413-000, 53230-413-000, 95014-22200. Fits Honda: CB250T 1978-79 CB400A HAWK HONDAMATIC 1978 CB400T HAWK 1978-80 1978-80 Honda CB250T CB400A Hondamatic CB400T Hawk Handlebar Clamp...

Fair condition. Steerer is straight. Moderate scuffs, scratches, and tarnish throughout. There are two gouges at the edges of the upper clamp pinch bolt holes. There are two accessory bolts broken off in the lower clamp. 35mm diameter fork clamps. 195mm between upper and lower clamps. 170mm centre to...

Fair condition. No significant damage. Cover is not broken or cracked, but has alot of cosmetic scratching (see pics). 1983 Suzuki GSX750ES Fork Crown Cover

Good condition. Steerer is straight. Finish is moderately tarnished throughout. Includes head hardware. Includes pinch bolts. Includes handlebar clamps. Includes handlebar cover. Honda part number: 53200-MK3-000, 53230-MK3-000. Fits Honda: VF700C MAGNA 1985-86 VF750C MAGNA 1985-86 1985-86 Honda VF700C...

Good condition. Steerer is straight. Some surface rust. Paint is scuffed and scratched. Includes head hardware. Includes crossover air line and collars. Includes pinch bolts. Removed fron an '83 model that takes tapered roller bearings. Will also fit '84 and '85 VF700F and VF750F by changing to ball...

Good condition. No cracks or damage. Finish has moderate scratches and scrapes. Includes 6 accessory bolts. No pinch bolts. Honda part number: 53230-MB2-000. Fits Honda: VF700F INTERCEPTOR 1984-85 VF750F INTERCEPTOR 1983-84 1983-85 Honda VF700F VF750F Interceptor Fork Top Clamp 53230-MB2-000

Good condition. No damage. Paint is chipped, scuffed and scratched throughout. Includes head bearings and hardware. Includes 1 pinch bolt. Steerer is straight. Honda part numbers: 53200-MA4-670, 53230-MA4-670. Fits Honda: CB750K FOUR 1981-82 1981-82 Honda CB700K Four Fork Tree 53200-MA4-670 53230-MA...

Good condition. Steerer is straight. Includes bearings and head hardware. Includes bar clamp bolts. Includes pinch bolts. Finish is moderately deteriorated throughout. Honda part number: 53200-463-670ZA, 53230-463-000. Fits Honda: GL1100 GOLDWING 1980-81 GL1100I GOLDWING INTERSTATE 1980-81 1980-81 Honda...

Good condition. Steerer is straight. Includes bearings and head hardware. Includes eagle emblem bar clamp - clamp has pitting in the chrome. Lower clamp needs some fresh paint. Honda part number: 53200-463-670ZA, 53230-463-000. Fits Honda: GL1100 GOLDWING 1980-81 GL1100I GOLDWING INTERSTATE 1980-81 1980-81...

Good condition. Steerer is straight. No damage. Minor cosmetic scratches. Includes pinch bolts. Includes head hardware. Includes bar clamps. Honda part number: 53200-460-840ZA, 53230-460-840. Fits Honda: CB650SC NIGHTHAWK 1982 1982 Honda CB650SC Nighthawk Fork Tree 53200-460-840ZA 53230-460-840

Good condition. Steerer is straight. Threads are good. Includes head hardware. Clamp needs paint. NOTE: Comes with tapered roller bearing head hardware - check your frame as I believe some Ascots use ball bearings. Honda part number: 53200-MF8-000. Fits Honda: VT500FT ASCOT 1983-84 1983-84 Honda VT500FT...

Good condition. Steerer is straight. Threads are good. Includes head hardware. Clamp needs paint. NOTE: Comes with ball bearing head hardware - check your frame as I believe some Ascots use tapered roller bearings. Honda part number: 53200-MF8-000. Fits Honda: VT500FT ASCOT 1983-84 1983-84 Honda VT500FT...